Bathroom Counter Tops Fort Worth - Quick Bathroom Upgrade -  Bath Lavatory - Bathroom Remodeling Hurst, Southlake, Flower Mound, Grapevine and Keller

As one of the most used rooms in our homes, we all dream of updating our baths to create a beautiful and inviting space. But in today's tough economy, many of us worry that we might not get a return on our investment. In fact, according to Consumer Reports, in today's market, we may only recover about 78 percent.

Luckily, you don't have to sink a hefty sum of time and money into your bath to achieve dramatic results that you can enjoy every day.

Whether you're planning to splurge on a full-blown bathroom renovation or you just want a quick fix to liven things up, The Onyx Collection is a perfect fit.

The Onyx Collection manufactures shower bases, shower pans, tub replacements, lavatories, tub surrounds, fireplace hearths, slabs, seats, trim and other shower accessories to your specifications in almost any sizes, shapes, and colors, for your bathroom remodeling needs.

CONTACT US

Hurst - 817-280-9258
Grapevine – 817-269-2091

Call now to speak to one of our professional agents!

The Onyx Collection gives you a choice of over 60 colors and 75 standard base sizes so you don't have to settle for something you really don't want.

For a distinctive look, several different Trim options are available, as well as contrasting Stripes and Borders and even Graphic Inlays to enhance the beauty and uniqueness of your shower.

Standard Full Height Shower Bases are available individually and also as a kit with our Onyx wall panels. The Standard Full Height Curb height is 4 1/4” tall.

The Custom Full Height Curb height is 3 3/8” tall. This curb height works well with both shower doors and curtains. Other shower wall systems such as ceramic tile can also be used with Onyx shower bases.

Low Profile Shower Bases are often used when either: 1) stepping into high tub or over a tall shower curb is too difficult, or, 2) when a more contemporary look is desired.

Standard Low Profile Curb height is 1 1/4” to 2 1/8” tall. Custom Low Profile Showers can be made any size and shape needed. The low curb height ranges from 1 1/4" to 2 1/4" tall depending on the size of the shower.

Ramped Shower Bases are designed for the Ultimate Wheelchair Access. They are designed for use with or without a shower door.

All curbs have a slope back into the shower area and the shower area has a 1/4” per foot slope towards the drain.

Individual Ramp turns any Low Profile Base into a Ramped Base. They can be attached permanently, temporarily, or left unattached or removable.

They are finished on left and right ends, top and front edge and can be ordered any length.

The Onyx Collection also provides a wide range of accessories including Soap Dishes, Shampoo Caddies, Towel Bars, Shower Seats and even Foot Shelves.

Custom Shape Shower Bases

All our custom shower bases are cast in pieces to your specifications and then chemically bonded into a single unit for easy, worry-free installation.

To the left are some of the more popular styles we make, and also some very unique designs.

Onyx Shower Kits can be ordered in 78”, 84”, 90”, and 96” tall heights (and any other height as needed).

These kits include the shower base, all wall panels, adhesive silicone, and also color match seamfill silicone.

Standard Lavatories are available in hundreds of sizes, 11 bowl styles, either Flat or Raised edge and also 5/8" or 1" thickness. Standard Lavatories can have one bowl (centered or offset) or two bowls. Click on the bowl style below to see all the available sizes.

A Standard Lavatory is one for which we already have a mold, and so it requires no special setup, and is therefore generally less expensive than a custom.

Our Standard Lavatories are shown below by bowl style. If the lavatory you need is not shown below, including anything with an Eclipse bowl, it is available as a custom lavatory.

Standard Lavatories all have at least one integral (molded-in) bowl. The bowl is generally centered, although we now offer some Standards with offset bowls.

All Standard Lavatories have an integral backsplash. If you want no backsplash or no bowl, you will need a custom sink.

Standard Lavatories have either a Raised Edge or Flat Edge around the front and both ends. For Ogee, Bevel, and Double Eased edges, you will need a custom sink.

Standard Lavatories are less expensive than custom ones because they are cast on specific molds which are based on standards in the cabinet industry, and so they require less time and labor to manufacture.

Standards can often be cut down at a small charge to make other sizes that might otherwise require a custom setup, or to facilitate wall-to-wall installations. Up to 1 1/2" can be cut off each end of a Standard Lavatory.

Custom Lavatories

Below are drawings of some common custom lavatory designs. Custom lavatories can be any length, depth, thickness, or shape and can incorporate any of our bowl styles and edge styles.

The possibilities are endless... if you can dream it, we can make it.

Please specify faucet hole spacing when ordering: 4" is typical for a one-piece faucet set; 8" is used for three piece sets.

We can also do single holes, and even add an extra hole for a soap dispenser if requested.